Automated Systems · Cambridge syllabus 6.1 · Lesson 1 of 1
Automated Control
An automated system uses sensors, a microprocessor and actuators together. The sensors take readings, the microprocessor compares them with stored values and decides what to do, and the actuators carry out the action, over and over. Automated systems are used in industry, transport, agriculture, weather forecasting, gaming, lighting and science, and each has advantages and disadvantages in its setting.
By the end, you can
- Understand the purpose of automated systems.
- Describe how sensors, microprocessors and actuators work together in an automated system.
- Explain how input data can control an automated process.
- Describe automated systems in industry, transport and agriculture.
- Describe automated systems in weather forecasting, gaming, lighting and science.
- Describe the advantages and disadvantages of an automated system in a given scenario.
Automated systems
An automated system carries out a task without a person controlling it, by measuring what is happening and acting on the measurements. It exists to do jobs that are repetitive, need constant watching, need reactions faster than a person can manage, or happen where it would be dangerous for a person to be.
Every one is built from the same three parts. Sensors provide the input, measuring a physical quantity continuously and automatically. A microprocessor provides the processing, comparing each reading with a stored value and deciding what to do. Actuators provide the output, producing physical movement or change — a motor, a valve, a heater, a pump.
A greenhouse shows the whole loop. Temperature, humidity and light sensors read conditions; the processor compares them with the stored ideal values; if it is too hot, it sends a signal that opens a vent, and if it is too dry it starts the watering. If a reading matches the stored value, nothing needs to change. Then the sensors read again and the comparison is repeated, over and over. Nobody is present, and the system works all night.
The advantages are consistency, working continuously without breaks, fast and precise reaction, and safety where the environment is hostile. The costs are the initial expense, the need for maintenance and calibration, the loss of jobs the system replaces, and the fact that a failed sensor makes a confident wrong decision rather than stopping to think.
Worth remembering
- Sensors input, a microprocessor decides, actuators act.
- The processor compares each reading with a stored value.
- Consistent and tireless, but a failed sensor produces confident wrong decisions.
Automated systems in use
The syllabus asks about automated systems in seven areas, each using sensors, a microprocessor and actuators. In industry, a production line uses sensors to check each product and actuators to move, fill or reject it; in a chemical plant, temperature and pressure sensors keep a reaction safe by opening valves. In transport, automatic trains and traffic lights use sensors to detect trains, cars or people and control signals and brakes; cars use them for automatic braking and parking. In agriculture, moisture sensors decide when to water crops, and automated systems feed animals or control greenhouse conditions.
In weather forecasting, automated weather stations take temperature, humidity, pressure and wind readings day and night in remote places and send them to forecasters. In gaming, accelerometers and proximity sensors in a controller or headset detect movement, and actuators make the controller vibrate. In lighting, light and infra-red sensors switch lights on when it is dark or when someone enters a room, and off when they leave. In science, automated systems take readings in experiments far more often and accurately than a person could, and work in dangerous places such as inside a volcano or in space.
Advantages to weigh in a scenario: an automated system works continuously without breaks, reacts faster and more consistently than a person, can work in dangerous or unpleasant places, and can save money and energy over time. Disadvantages: it is expensive to set up and maintain, it can fail if a sensor or the power fails, it can be hacked if it is connected to a network, and it can replace jobs people did.
In an answer, link each point to the scenario. For automatic street lighting, an advantage is that lights are only on when needed, which saves energy; a disadvantage is that a dirty or faulty light sensor could leave a street dark.
Worth remembering
- Seven areas: industry, transport, agriculture, weather, gaming, lighting and science.
- Advantages: continuous, fast and consistent, safe in dangerous places, can save money.
- Disadvantages: expensive to set up, can fail or be hacked, can replace jobs.
Worked example
A thermostat reads temperature and switches a heater when the room is below the set point.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Read temperature, compare it with the target, switch a heater or fan as needed, then repeat the measurement.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.