Powers, Roots and Indices · Cambridge syllabus 1.3, 1.7, 1.8 · Lesson 3 of 3
Standard Form
A number in standard form is A × 10ⁿ with 1 ≤ A < 10 and n an integer: a positive power for numbers of 10 or more, a negative power for numbers less than 1. Multiply or divide the numbers in front and the powers of ten separately, then adjust so the number in front is between 1 and 10. To add or subtract, use the same power of ten first.
By the end, you can
- Understand the form A × 10ⁿ, where 1 ≤ A < 10 and n is an integer.
- Convert large and small numbers between ordinary form and standard form.
- Compare and order numbers written in standard form.
- Multiply and divide numbers in standard form using the index laws.
- Add and subtract numbers in standard form.
- Use a calculator to work in standard form and interpret its display.
Writing numbers in standard form
Standard form is a way of writing very large and very small numbers so that their size can be read at a glance. A number in standard form is written A × 10ⁿ, where A is at least 1 and less than 10, and n is an integer. The distance from the Earth to the Sun, about 150 000 000 km, becomes 1.5 × 10⁸ km.
To convert a large number, put the decimal point after the first non-zero digit to make A, then count how many places the point has to move to get back to the original number. For 47 300, A is 4.73 and the point moves 4 places, so 47 300 = 4.73 × 10⁴. A positive power of ten means the number is 10 or more.
Small numbers work the same way with a negative power. In 0.000 62 the first non-zero digit is in the fourth decimal place, so A is 6.2 and the point moves 4 places: 0.000 62 = 6.2 × 10⁻⁴. A negative power means the number is less than 1, and it follows from the index laws, since 10⁻⁴ = 1/10⁴ = 1/10 000.
Going back to an ordinary number, the power says how many places to move the point: 3.08 × 10⁵ = 308 000 and 7 × 10⁻³ = 0.007. The check that catches most mistakes is the value of A. 45 × 10³ is a correct number but not standard form, because A must be less than 10; it is 4.5 × 10⁴.
To compare numbers in standard form, compare the powers first: any number times 10⁶ is larger than any number times 10⁵, whatever comes in front. Only when the powers are equal do you compare the values of A. Negative powers need care, because 10⁻³ is larger than 10⁻⁵: 0.001 is larger than 0.000 01.
- A × 10ⁿ, where 1 ≤ A < 10
- Any non-zero number can be written as a number from 1 up to 10 multiplied by a whole-number power of ten.
Worth remembering
- Standard form is A × 10ⁿ, with 1 ≤ A < 10 and n an integer.
- A positive power gives a number of 10 or more; a negative power gives a number less than 1.
- To compare, look at the powers first and only then at the values of A.
Calculating in standard form
Core candidates calculate with standard form only on Paper 3, where a calculator is allowed; Extended candidates may do it on either paper. Multiplying and dividing in standard form uses the index laws from the previous lesson. Deal with the numbers in front and the powers of ten separately. (3 × 10⁴) × (5 × 10⁷) = (3 × 5) × 10^(4+7) = 15 × 10¹¹. That is not yet standard form, because 15 is more than 10, so write 15 as 1.5 × 10¹ and the answer becomes 1.5 × 10¹².
Division works the same way, subtracting the powers: (8 × 10³) ÷ (2 × 10⁻²) = (8 ÷ 2) × 10^(3−(−2)) = 4 × 10⁵. The double negative in the power is where most marks are lost.
Adding and subtracting cannot be done by combining the powers. Either change both numbers to ordinary numbers, or rewrite them with the same power of ten first. 6.2 × 10⁵ + 4 × 10⁴ is 620 000 + 40 000 = 660 000 = 6.6 × 10⁵. Writing 10.2 × 10⁵ is the classic error: the powers are different, so the numbers in front cannot simply be added.
On a calculator, enter standard form with the ×10ˣ key, marked EXP on some models: 3.2 × 10⁻⁴ is entered as 3.2, then ×10ˣ, then (−) 4. The key keeps the number together, so dividing by it works correctly. When an answer is too large or too small to display, the calculator shows it in standard form, and you write it as 2.5 × 10⁻⁷, never as 2.5⁻⁷.
- (a × 10ᵐ) × (b × 10ⁿ) = ab × 10^(m+n)
- Multiply the numbers in front, add the powers of ten, then adjust so the number in front is between 1 and 10.
- (a × 10ᵐ) ÷ (b × 10ⁿ) = (a ÷ b) × 10^(m−n)
- Divide the numbers in front, subtract the powers of ten, then adjust the result back into standard form.
Worth remembering
- Multiply or divide the numbers in front and the powers of ten separately, then adjust so 1 ≤ A < 10.
- To add or subtract, first write both numbers with the same power of ten, or as ordinary numbers.
- Enter standard form with the ×10ˣ key, and write calculator answers as A × 10ⁿ.
Worked example
(4 × 10⁶) × (6 × 10⁻²) = 24 × 10⁴ = 2.4 × 10⁵, and 0.000 305 = 3.05 × 10⁻⁴.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
(9 ÷ 3) × 10^(5−(−2)) = 3 × 10⁷; 0.000 48 = 4.8 × 10⁻⁴.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.