Still loading. This can take a moment on a slow connection.
Still loading. This can take a moment on a slow connection.
Unit 4 · Electricity and Magnetism
Build each circuit on the diagram so that it does what the task asks: two lamps that stay lit, two ammeters that agree, a supply shared in half, an unknown resistance measured.
Drag a part onto a wire, or choose one and then a gap. Press a switch to open or close it.
The loop is broken, so no current flows: an open switch, or a voltmeter in line with the current.
Task 1 of 6
Build whatever you like and watch what the meters do. A part dropped into a gap in the wire is in series; a part dropped below another is in parallel with it.
Drop parts into the gaps in the wire, open and close the switches, and watch what the meters read. Every part’s reading is on the diagram.
Parts · drag onto a wire
Choose a part on the diagram to change it or take it out.
Without a mouse
Choose a part, then Tab moves between the gaps in the wires and Enter places it. Escape stops. On the diagram, Delete takes the part out, and Enter opens or closes a switch.
A series–parallel network, solved exactly: resistances add in series and conductances add in parallel. The meters are ideal: an ammeter has no resistance and a voltmeter has infinite resistance, so a voltmeter put in line with the current stops it, as it would on the bench. The cell has no internal resistance, so its voltage stays the same however much current is drawn, and a lamp is a fixed resistance, not a filament whose resistance climbs as it heats. A lamp is lit from 0.05 A. Bridge networks cannot be built here, and nothing in 4.3 asks for one. Nothing is scored.