Turning Effect of Forces · Cambridge syllabus 1.5.2 · Lesson 2 of 2
Principle of Moments
Includes Supplement objectivesFor rotational equilibrium, total clockwise moment equals total anticlockwise moment. Translational equilibrium also requires zero resultant force. The pivot’s support force can balance the downward forces.
By the end, you can
- Calculate clockwise and anticlockwise moments.
- Apply the principle of moments.
- Solve balancing-beam problems.
- State that an object is in equilibrium when there is no resultant force and no resultant moment.
- Apply the principle of moments with more than one force on each side of the pivot. [Supplement]
- Describe an experiment to show that there is no resultant moment on an object in equilibrium. [Supplement]
Equilibrium
When an object is balanced and not turning, the principle of moments applies: the total clockwise moment about any pivot equals the total anticlockwise moment. This is the condition for rotational equilibrium, and it is the tool for almost every beam or see-saw question.
Work through it methodically. Choose the pivot. For each force, work out its moment and label it clockwise or anticlockwise. Set the two totals equal, then solve. A 4 N load 0.3 m to the left of the pivot gives 1.2 N m anticlockwise; to balance it, an 8 N load on the right must sit at 1.2 ÷ 8 = 0.15 m.
Notice what this shows: equal forces do not balance unless they are equally far from the pivot, and a small force far out can balance a large force close in. That is the whole principle of a lever, and it is why a crowbar works.
An object is in equilibrium when there is no resultant force and no resultant moment acting on it. Both conditions are needed. Balanced moments stop it starting to turn; a zero resultant force stops it starting to move off in a straight line. For a beam resting on a pivot, the upward force from the pivot equals the total downward force on the beam, so the forces balance as well as the moments.
Worth remembering
- Principle of moments: total clockwise moment = total anticlockwise moment.
- Equilibrium: no resultant force and no resultant moment.
- A small force far from the pivot can balance a large force close to it.
More than one force each side
The principle of moments does not care how many forces there are. With several forces on each side of the pivot, work out every moment, add up all the clockwise ones and all the anticlockwise ones, and set the two totals equal.
Take a uniform metre rule balanced at its centre, so that its own weight acts through the pivot and has no moment. On the left hang 2.0 N at 0.30 m from the pivot and 1.0 N at 0.10 m. On the right hang 1.5 N at 0.20 m, and an unknown load W at 0.25 m. The anticlockwise total is (2.0 × 0.30) + (1.0 × 0.10) = 0.60 + 0.10 = 0.70 N m. The clockwise total is (1.5 × 0.20) + (W × 0.25) = 0.30 + 0.25W. Setting them equal gives 0.25W = 0.40, so W = 1.6 N.
You can test the principle with exactly this apparatus. Balance a metre rule on a pivot at its centre. Hang several known weights from loops of thread on both sides, and slide them along until the rule rests horizontally. Read each distance from the pivot to the thread on the rule’s scale, then work out each moment. Add the clockwise moments and the anticlockwise moments separately. The two totals come out equal, within the small errors of reading the scale, for every arrangement you try that balances. The rule is in equilibrium with no resultant moment.
Two details make the experiment fair. Pivoting the rule at its centre means its weight has no turning effect, so only the loads you added need counting. And the force from the pivot passes through the pivot itself, so its moment about the pivot is zero and it never enters the sums.
Worth remembering
- Several forces each side: add all the clockwise moments, add all the anticlockwise moments, set equal.
- Experiment: balance loads on a metre rule pivoted at its centre and compare the two totals.
- The pivot force and the weight of a rule pivoted at its centre have no moment about the pivot.
Worked example
A 4 N load 0.3 m left balances a 6 N load 0.2 m right: both moments are 1.2 N m.
Balance the beam
Change a value and watch the readings follow. Open it on the lab stage
Balance the beam
Balanced: the two moments are equal.
- Anticlockwise moment
- 1.2 N m
- 4 N × 0.3 m
- Clockwise moment
- 1.2 N m
- 6 N × 0.2 m
- Net clockwise moment
- 0 N m
- clockwise − anticlockwise
Goal
Find the rule that makes a beam balance, then use it to balance loads that are not equal.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Balance the beam with 8 N on the left., not yet
- Move the right-hand load further out without changing its force. What happens to its moment?, not yet
- Tip the beam anticlockwise using the smaller of the two forces., not yet
Left load
Right load
moment = force × distance from the pivot
4 N × 0.3 m = 1.2 N m anticlockwise; 6 N × 0.2 m = 1.2 N m clockwise
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Massless beam on a central pivot; only vertical loads are modelled, and the tilt is an indicator of direction rather than a calculated angle.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
8d = 4 × 0.6, so d = 0.30 m.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.