Centre of Gravity · Cambridge syllabus 1.5.3 · Lesson 2 of 2
Stability
An object topples when the vertical line through its centre of gravity passes beyond its base. Lowering the centre of gravity or widening the base increases the tilt needed for toppling.
By the end, you can
- Relate centre of gravity and base area to stability.
- Explain why objects topple.
- Apply stability concepts to real structures.
Stable objects
Tilt an object and its weight still acts vertically downwards through its centre of gravity. Whether it falls back or topples over depends on one thing: whether that vertical line still passes inside the base it is standing on.
If the line falls within the base, the weight produces a moment about the tipping edge that rotates the object back down — it is stable and rights itself. If the tilt is large enough to carry the line outside the base, the same weight now produces a moment the other way, and the object carries on over. The critical position is the tilt at which the line passes exactly through the edge of the base.
Two design choices therefore increase stability. A wider base means the line has further to travel before it escapes, so a greater tilt is needed. A lower centre of gravity does the same, because the line moves sideways less for a given angle of tilt. A racing car is wide and low for exactly this reason, and a double-decker bus is tested by tilting it to check that it does not.
Loading matters as much as shape. Putting heavy luggage on a roof rack raises the centre of gravity and makes a car easier to roll, while ballast low in a ship’s hull lowers it and makes the ship harder to capsize. Mass alone is not the point: a heavy but tall object can be less stable than a light, squat one.
Worth remembering
- An object topples when the vertical line through its centre of gravity falls outside its base.
- A wider base and a lower centre of gravity both increase stability.
Worked example
A wide, low vehicle is harder to overturn than a narrow, tall vehicle of similar mass.
When does it topple?
Change a value and watch the readings follow. Open it on the lab stage
When does it topple?
Let go here, it falls back: the weight line is 0.128 m inside the base.
- Tilt needed to topple
- 26.565°
- tan⁻¹(0.5 m ÷ 1 m)
- Weight line inside the base
- 0.128 m
Goal
Find what decides whether a tilted block falls back or topples over, and how to make it harder to topple.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Tilt the block until its weight line leaves the base., not yet
- Make the block need more than 45° of tilt before it topples., not yet
- Keep the base at 1 m and lower the centre of gravity. How much further can it tilt now?, not yet
weight line outside the base → the weight turns the block over
tilted 20°; it topples beyond 26.565° with a 1 m base and its centre of gravity 1 m up
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
A rigid, uniform rectangular block, its centre of gravity half-way up, tipped about the lower edge it leans towards. The drawing holds it at the tilt set; it is not animated.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Its higher centre of gravity moves the weight line outside the base at a smaller tilt.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.