Kinetic Particle Model of Matter · Cambridge syllabus 2.1, 2.2.3 · Lesson 4 of 4
Gas Pressure
Includes Supplement objectivesGas particles collide with the container walls and exert a force on them. Gas pressure is the force per unit area from these collisions. At fixed volume, hotter particles collide harder and more often, so pressure rises. At fixed temperature, compressing a fixed mass of gas makes collisions more frequent, so pressure rises.
By the end, you can
- Explain gas pressure using collisions with container walls.
- Relate pressure to particle speed and collision frequency.
- Describe, in terms of particles, how the pressure of a fixed mass of gas changes when its temperature changes at constant volume.
- Describe, in terms of particles, how the pressure of a fixed mass of gas changes when its volume changes at constant temperature.
- Describe gas pressure as the force per unit area exerted by particles colliding with a surface. [Supplement]
- Recall and use pV = constant for a fixed mass of gas at constant temperature, including its graph. [Supplement]
Pressure from particles
Gas pressure comes from collisions. The particles of a gas are in constant random motion, and each time one strikes the wall of its container it bounces off and exerts a small force on the wall. There are so many collisions every second, spread over every part of every wall, that together they make a steady, even push outwards on every surface the gas touches. The container does not need to move: a sealed jar of gas standing on a shelf is pushing on all of its walls, all the time.
Two things decide how large the pressure is: how hard the particles hit the walls, and how often. Faster particles hit harder, and they also reach the walls more often. More particles in the same space, or the same particles crowded into a smaller space, means more collisions every second. Anything that makes the collisions harder or more frequent raises the pressure.
Pumping up a tyre that is already inflated is the simplest example. Its volume hardly changes, so adding more air means more particles hitting the inside of the tyre each second, and the pressure rises. Take every particle out of a container, leaving a vacuum, and there are no collisions at all, so there is no pressure from inside.
Worth remembering
- Gas pressure is caused by particles colliding with the container walls.
- Harder or more frequent collisions mean a higher pressure.
- More gas in the same space means more collisions per second, so more pressure.
Pressure, temperature and volume
Heat a fixed mass of gas in a sealed, rigid container, so that its volume cannot change. The particles move faster. Each one hits the walls harder, and because they are moving faster they also hit the walls more often. Both effects push the pressure up, and cooling the gas does the opposite. This is why an aerosol can carries a warning never to heat it, and why tyre pressures read higher after a long drive.
Now squeeze a fixed mass of gas into a smaller volume, keeping its temperature the same. The particles are no faster than before, so each collision is no harder. But the same number of particles is crowded into less space, so they strike each part of the wall more often, and the pressure rises. A common wrong answer is that the particles hit harder when the gas is squeezed: at the same temperature they hit more often, not harder. Let the gas expand into a bigger volume and the collisions become less frequent, so the pressure falls.
Pressure is force per unit area, and gas pressure is exactly that: the total force of all the particles colliding with a surface, divided by the area of that surface. A bigger patch of wall receives more collisions and so more force, but the force on each square metre is the same, so the pressure is the same all over the wall.
For a fixed mass of gas at constant temperature there is an exact rule: pressure × volume stays constant, pV = constant, often written p₁V₁ = p₂V₂. Halve the volume and the pressure doubles. For example, a gas at 100 kPa filling 60 cm³ is squeezed to 30 cm³ at constant temperature. Then 100 × 60 = p₂ × 30, so p₂ = 6000 ÷ 30 = 200 kPa. Any units will do, as long as you use the same ones on both sides.
A graph of pressure against volume for this rule is a curve that falls steeply at first and then levels out, never touching either axis: wherever you are on it, doubling the volume halves the pressure. Plot pressure against 1/V instead and the points lie on a straight line through the origin, which is the clearest sign that pV is constant.
- pV = constant
- For a fixed mass of gas at constant temperature, pressure × volume does not change, so halving the volume doubles the pressure.p in Pa, V in m³ (any units, if the same on both sides). Also written p₁V₁ = p₂V₂.
Worth remembering
- Hotter gas at constant volume: particles hit harder and more often, so the pressure rises.
- Smaller volume at constant temperature: collisions are more frequent, not harder, so the pressure rises.
- Gas pressure is the force per unit area from particles colliding with a surface.
- pV = constant: p against V is a curve; p against 1/V is a straight line through the origin.
Worked example
At constant temperature, p₁V₁ = p₂V₂. Halving volume doubles pressure, and a graph of p against 1/V is a straight line through the origin.
Compress a gas
Change a value and watch the readings follow. Open it on the lab stage
Compress a gas
The gas pushes out on the piston exactly as hard as the air outside pushes in.
- Pressure
- 100 kPa
- 100 kPa × 60 cm³ ÷ 60 cm³ × 300 K ÷ 300 K
- Hits on the piston each second
- 1 × at the start
- 60 cm³ ÷ 60 cm³ × √(300 K ÷ 300 K)
- Force of each hit
- 1 × at the start
- √(300 K ÷ 300 K)
Goal
Find how squeezing a gas, and heating it, change the pressure it exerts on its container.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Halve the volume while keeping the temperature at 300 K. What happens to the pressure?, not yet
- Put the volume back to 60 cm³, then double the pressure by heating the gas instead., not yet
- Make the air outside push on the piston harder than the gas pushes out., not yet
pV = constant, for a fixed mass of gas at constant temperature
100 kPa × 60 cm³ = 6,000 kPa cm³, at 300 K
Pressure / kPa
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
A fixed amount of ideal gas, at 100 kPa when it fills 60 cm³ at 300 K. The piston is held wherever the volume is set, so the gas inside and the air outside, at 100 kPa, can push on it unequally. The drawing has a few dozen particles, which do not collide with one another; a real gas has vastly more. Hits and force are shown as multiples of what they were at the start, at 60 cm³ and 300 K.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
p₂ = 100 × 60/30 = 200 kPa.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.