Transfer of Thermal Energy · Cambridge syllabus 2.3 · Lesson 3 of 4
Infrared Radiation
Includes Supplement objectivesAll objects emit infrared radiation. Net energy transfer is from warmer to cooler surroundings. Dark matt surfaces are generally better infrared absorbers and emitters than light shiny surfaces. Radiation can travel through vacuum.
By the end, you can
- Know that thermal radiation is infrared radiation and that all objects emit it.
- Explain emission and absorption of infrared radiation.
- Know that thermal radiation needs no medium, so it can cross a vacuum.
- Compare good and poor emitters.
- Compare good and poor absorbers.
- Apply ideas to buildings, cooking and thermal insulation.
- Know that an object stays at a constant temperature when it transfers energy away at the same rate as it receives energy. [Supplement]
- Know what happens to an object's temperature when it receives energy faster or more slowly than it transfers energy away. [Supplement]
- Explain how the Earth's temperature depends on the balance between incoming radiation and radiation emitted from the Earth's surface. [Supplement]
- Describe experiments to distinguish between good and bad emitters of infrared radiation. [Supplement]
- Describe experiments to distinguish between good and bad absorbers of infrared radiation. [Supplement]
- Describe how the rate of emission of radiation depends on the surface temperature and the surface area of an object. [Supplement]
Thermal radiation
Thermal radiation is infrared radiation, a type of electromagnetic wave in the same family as light. Every object emits infrared radiation all the time, simply because its temperature is above absolute zero: you do, a cup of tea does, and so does an ice cube. Hotter objects emit considerably more than cooler ones, but even cold objects emit some.
Because it is a wave, thermal radiation needs no medium: no particles are needed to carry it. That makes it the only one of the three ways of transferring thermal energy that works through a vacuum, and it is how energy from the Sun reaches the Earth across about 150 million kilometres of almost empty space. Conduction and convection both need particles, so neither can cross a vacuum.
Objects absorb radiation as well as emitting it. When an object is hotter than its surroundings it emits more than it absorbs and cools; when it is cooler it absorbs more than it emits and warms; at the same temperature the two rates are equal and it stays put. Thermal imaging cameras work by detecting the infrared an object emits, which is why they can see in complete darkness.
Worth remembering
- Thermal radiation is infrared radiation, an electromagnetic wave.
- All objects emit infrared; hotter objects emit more.
- It needs no medium, so it is the only transfer process that works through a vacuum.
Surface properties
How well a surface emits and absorbs radiation depends on its colour and texture. Matt black surfaces are the best emitters and the best absorbers. Shiny silver or white surfaces are the poorest at both, and they are also the best reflectors. In general, dull is better than shiny and black is better than white.
The pairing is not a coincidence: a good absorber is always a good emitter, and a good reflector is always a poor emitter. A surface that readily takes energy in also readily gives it out.
The applications follow directly. The cooling fins on the back of a refrigerator are dark to emit well. Solar water heating panels are matt black to absorb well. Emergency foil blankets and the silvered walls of a vacuum flask are shiny to reflect radiation back and emit as little as possible. Houses in hot countries are painted white to reflect sunlight, and food wrapped in shiny foil stays hot for longer.
A vacuum flask is the neat summary of the whole topic: a vacuum between double walls stops conduction and convection across the gap, and silvered surfaces cut radiation, so all three transfer routes are greatly reduced at once.
Worth remembering
- Matt black: best absorber and best emitter. Shiny white or silver: poorest at both, best reflector.
- A good absorber is always a good emitter.
- A vacuum flask: the vacuum stops conduction and convection; the silvering reduces radiation.
Energy balance
An object’s temperature depends on the balance between the rate at which it receives energy and the rate at which it transfers energy away. If the two rates are equal, its temperature stays constant. If it receives energy faster than it transfers energy away, its temperature rises; if it transfers energy away faster than it receives it, its temperature falls.
Switch on a 600 W hotplate. At first it is barely warmer than the room and loses very little energy, so most of the 600 J arriving each second warms it up. The hotter it gets, the faster it loses energy, by radiation and in other ways, until it is losing 600 J every second, as fast as it receives energy. From then on its temperature stays constant. Turn the power down and it loses energy faster than it receives it, so it cools until the rates match again at a lower temperature; turn the power up and it warms to a new, higher steady temperature.
The same balance sets the temperature of the Earth. The Earth absorbs radiation from the Sun, and its warm surface emits infrared radiation back towards space. Its temperature settles where these two rates are equal, and anything that changes either rate changes that temperature.
Some gases in the atmosphere, such as carbon dioxide, methane and water vapour, absorb part of the infrared emitted by the surface and send some of it back down. More of these greenhouse gases means less infrared escapes to space, so the Earth warms until the balance is restored at a higher temperature. More cloud, snow and ice reflect more of the incoming sunlight away, so less is absorbed. And on a clear night more infrared escapes to space than on a cloudy one, so the ground cools faster.
Worth remembering
- Constant temperature: energy is transferred away at the same rate as it is received.
- Receiving energy faster than it is lost: temperature rises. Losing it faster: temperature falls.
- The Earth’s temperature is set by the balance between absorbed sunlight and infrared emitted from its surface.
- More greenhouse gases trap more infrared, so the Earth warms to a new, higher balance temperature.
Investigating radiation
To compare emitters, use a Leslie cube: a hollow metal cube whose four vertical faces have different surfaces, such as matt black, shiny black, matt white and shiny silver. Fill it with very hot water so that every face is at the same temperature, then point an infrared detector, or a thermometer with a blackened bulb, at each face in turn from the same distance. The matt black face gives the highest reading and the shiny silver face the lowest. Keeping the temperature and the distance the same makes the comparison fair. A simpler version fills a matt black can and a shiny can with equal volumes of hot water and records which cools faster: the black one does.
To compare absorbers, stand two identical metal plates facing a radiant heater, one painted matt black and one shiny silver, with a coin or a drawing pin stuck to the back of each with a little wax. Place the heater exactly halfway between them so that both receive the same radiation, and switch on. The matt black plate absorbs more infrared and warms faster, so its wax melts and its coin drops first. The shiny plate reflects most of the radiation, so its wax takes much longer to melt.
Two more things decide how fast a surface emits radiation. The first is its temperature: the hotter the surface, the greater the rate of emission, so a plate at 120 °C emits energy much faster than the same plate at 80 °C. The second is its surface area: for the same temperature and the same kind of surface, doubling the area doubles the rate of emission. That is why things designed to lose energy quickly, such as the cooling fins on an engine, have a large surface area, and why a cat curls into a ball on a cold night, to cut down the surface it loses energy from.
Worth remembering
- Emitters: a Leslie cube of hot water and an infrared detector; the matt black face reads highest.
- Absorbers: black and shiny plates the same distance from a heater; wax on the black plate melts first.
- A hotter surface, or a larger surface area, emits radiation at a greater rate.
Worked example
A vacuum flask reduces conduction and convection with a vacuum and reduces radiation with reflective surfaces.
Compare emitting surfaces
Part of the full Physics course. This unit’s free simulation is Compress a gas.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
It is a poor infrared emitter, reducing radiative energy loss.
Check your method, units and explanation against it.
Marked practice
Set 1 of 6 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.