General Wave Properties · Cambridge syllabus 3.1 · Lesson 3 of 4
Transverse and Longitudinal Waves
Includes Supplement objectivesTransverse vibration is perpendicular to wave travel: electromagnetic radiation, water waves and seismic S-waves. Longitudinal vibration is parallel to it, creating compressions and rarefactions: sound and seismic P-waves. In both cases particles oscillate rather than moving continuously with the disturbance.
By the end, you can
- Particle vibration perpendicular to energy transfer.
- Examples: electromagnetic radiation, water waves and seismic S-waves.
- Particle vibration parallel to energy transfer.
- Compressions and rarefactions. [Supplement]
- Examples: sound waves and seismic P-waves.
Transverse waves
In a transverse wave the direction of vibration is at right angles to the direction the wave travels, which is the direction the energy goes. Shake one end of a rope up and down and the wave runs along the rope while every point on it moves vertically.
Transverse waves have crests and troughs, which is what gives them the familiar wavy shape on a graph. All electromagnetic radiation, including light and radio waves, can be modelled as transverse, and so can water waves.
Earthquakes send seismic waves through the Earth, and they come in two kinds. The secondary waves, called S-waves, are transverse: the rock vibrates from side to side, at right angles to the direction the wave is travelling. The other kind is longitudinal, as the next section shows.
Worth remembering
- Transverse: vibration at right angles to the direction of travel.
- Transverse waves have crests and troughs.
- Examples: electromagnetic radiation, water waves and seismic S-waves.
Longitudinal waves
In a longitudinal wave the direction of vibration is parallel to the direction the wave travels. Push and pull one end of a stretched spring and a pulse of squashed-together coils runs along it, with each coil moving back and forth along the length of the spring.
Sound is the important example. A loudspeaker cone moves forwards and backwards, pushing and pulling on the air, and the air particles vibrate back and forth along the direction the sound travels. The primary waves from an earthquake, called P-waves, are longitudinal too: the rock is squeezed and stretched along the direction the wave moves.
Instead of crests and troughs, a longitudinal wave has compressions, where the particles are bunched closer together than normal, and rarefactions, where they are spread further apart. In a sound wave, a compression is a region of slightly higher pressure and a rarefaction a region of slightly lower pressure, and the pattern travels outwards from the source.
Sound needs particles to pass the vibration along, so it cannot travel through a vacuum. This is why a bell ringing inside a jar falls silent as the air is pumped out — you can still see it moving, because light needs no medium.
Worth remembering
- Longitudinal: vibration parallel to the direction of travel.
- Examples: sound waves and seismic P-waves.
- Compressions: particles bunched together. Rarefactions: particles spread apart.
- Sound needs a medium and cannot travel through a vacuum.
Worked example
Sound in air is longitudinal: alternating high- and low-density regions travel from the source.
Make a wave
Change a value and watch the readings follow. Open it on the lab stage
Make a wave
A wave travels along the light rope at 2 m/s, with its crests 2 m apart.
- Wave speed
- 2 m/s
- Wavelength
- 2 m
- 2 m/s ÷ 1 Hz
- Period
- 1 s
- 1 ÷ 1 Hz
- Crest-to-trough height
- 1 m
- 2 × 0.5 m
Goal
Find out what sets the speed of a wave along a rope, and what changing the frequency does to its wavelength.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Follow the marked particle while a crest passes it. Does the particle travel along the rope with the wave?
- Raise the frequency on the light rope from 1 Hz to 2 Hz. What happens to the wavelength, and to the wave speed?, not yet
- Give a wave on the heavy rope a wavelength of 0.5 m., not yet
Source
v = fλ
2 m/s = 1 Hz × 2 m
Particle displacement / m
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
An ideal transverse wave on a rope long enough that nothing reflects from its far end, with no losses, so the amplitude never decays along it. Both ropes are under the same tension.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Sound in air is longitudinal; electromagnetic waves are transverse.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.