Types of Data Transmission · Cambridge syllabus 2.1 · Lesson 1 of 2
Serial and Parallel Transmission
Serial transmission sends bits sequentially along a channel. Parallel transmission sends several bits at once on separate channels. Parallel links require more conductors and can suffer timing skew between channels, particularly over distance.
By the end, you can
- Understand serial data transmission.
- Explain why bits are transmitted sequentially.
- Identify situations where serial transmission is appropriate.
- Understand parallel data transmission.
- Explain how multiple bits can be transmitted simultaneously.
- Compare parallel and serial transmission.
Serial transmission
Serial transmission sends the bits of a message one after another down a single channel. A byte leaves as eight separate pulses in eight time slots, and the receiver rebuilds it by reading the line at the agreed moments.
One channel means one wire pair, which makes the cable cheap, thin and easy to run a long way. It also means there is only one signal path, so there is nothing for the bits to get out of step with — a problem that matters more than it first sounds.
Serial is the right choice over any distance: a USB cable, a network cable, an internet connection and a telephone line are all serial. Modern serial links run so fast that the one-at-a-time restriction costs far less than it used to.
The trade to state in an answer is that serial is slower for the same signalling rate, because one bit goes per time slot rather than several, but it is more reliable over distance and needs less wire.
Worth remembering
- Serial sends bits one at a time down a single channel.
- Cheaper, thinner cable and no skew between channels, so it suits long distances.
- Used by USB, network cables and internet connections.
Parallel transmission
Parallel transmission sends several bits at the same instant, each on its own channel. An eight-channel link carries a whole byte in one time slot, so for the same signalling rate it moves eight times as much data.
The cost is eight sets of conductors instead of one, and a new problem: skew. The channels are never exactly identical, so bits sent together arrive slightly apart. Over a short distance the gap is harmless; over a long one it grows until bits from one time slot overlap the next and the data is corrupted. Neighbouring wires also interfere with each other, which gets worse as the rate rises.
That is why parallel is used inside a machine and almost nowhere else — the buses connecting the processor to memory are parallel, and they run a few centimetres. The old parallel printer cable has been replaced by serial USB precisely because serial scaled better.
So parallel is faster over a short distance, more expensive in wiring, and unreliable over a long one. Saying simply that parallel is faster than serial is the mistake examiners look for.
Worth remembering
- Parallel sends several bits at once, one per channel.
- Skew and interference between channels make it unsuitable over distance.
- Used for short internal connections such as a processor-to-memory bus.
Worked example
An eight-bit value needs eight bit intervals on a simple single-channel serial link, compared with one interval on an ideal eight-channel parallel link with the same per-channel rate.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Fewer conductors and less relative timing skew between multiple data lines make reliable long-distance transmission easier.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.