Simple Phenomena of Magnetism · Cambridge syllabus 4.1 · Lesson 3 of 3
Electromagnets
Includes Supplement objectivesA current-carrying coil produces a magnetic field resembling a bar magnet. Increasing current or the number of turns increases field strength; an iron core can strengthen it further. Reversing current reverses polarity.
By the end, you can
- Magnetic field around a current-carrying coil.
- Factors affecting electromagnet strength. [Supplement]
- Applications of electromagnets.
Solenoids
A solenoid is a coil of insulated wire. When a current flows through it, it produces a magnetic field with the same shape as that of a bar magnet: field lines emerging from one end, looping round and entering the other, and a strong uniform field along the inside.
Which end is north depends on which way the current goes round, found with the right-hand grip rule: curl the fingers of your right hand in the direction of the conventional current around the coil, and your thumb points to the north pole. Reverse the current and the poles swap.
Putting a soft iron core inside the solenoid makes an electromagnet, and it increases the field strength greatly, because the iron becomes magnetised and adds its own field. The strength can also be increased by raising the current or by adding more turns to the coil.
The advantage of an electromagnet over a permanent magnet is control. It can be switched on and off, its strength varied, and its poles reversed — which is why cranes in scrapyards use them to pick up and drop steel, and why they are at the heart of relays, circuit breakers, electric bells and loudspeakers.
Worth remembering
- A solenoid produces a bar-magnet-shaped field; the right-hand grip rule gives the north end.
- Increase the field with more current, more turns, or a soft iron core.
- An electromagnet can be switched off, varied and reversed; a permanent magnet cannot.
Worked example
A relay uses an electromagnet to move a switch, allowing one circuit to control another.
Control an electromagnet
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Increase the current or number of turns; adding a suitable iron core is another method.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.