Electrical Safety · Cambridge syllabus 4.4 · Lesson 2 of 4
Fuses and Circuit Breakers
A fuse melts when excessive current heats its wire, opening the circuit. A circuit breaker also interrupts a fault current and can be reset after the fault is corrected. Select a fuse rating above normal operating current but suitable for protecting the wiring.
By the end, you can
- Understand how a fuse protects a circuit.
- Select an appropriate fuse rating.
- Explain automatic interruption of excessive current.
- Compare circuit breakers and fuses.
Fuses
A fuse is a thin piece of wire designed to melt if the current through it exceeds its rating, breaking the circuit and stopping the current. It is placed in the live wire, so that when it blows the appliance is disconnected from the live supply rather than left connected through the neutral.
Choosing the rating is a standard exam calculation. Work out the normal operating current from P = VI, then pick the next standard fuse above it — commonly 3 A, 5 A or 13 A. A 700 W appliance on 230 V draws 700 ÷ 230 = 3.0 A, so a 5 A fuse is appropriate. A fuse rated too high will not blow when it should; one rated too low will blow in normal use.
A fuse protects the appliance and the wiring from the fire risk of an excessive current. It is not fast enough to protect a person reliably from electrocution.
Worth remembering
- A fuse is a thin wire that melts above its rated current; it goes in the live wire.
- Choose the rating with I = P ÷ V, then take the next standard value above it.
Circuit breakers
A circuit breaker, also called a trip switch, does the same job as a fuse but works as an electromagnetic switch rather than by melting. A large current makes an electromagnet inside it strong enough to pull a catch, which springs the contacts apart and cuts off the current.
It has two advantages. It operates much faster than a fuse melts, and it can be reset with a switch once the fault is fixed, instead of being replaced. That is why modern consumer units use breakers rather than rewirable fuses.
Like a fuse, a trip switch has a setting: the current at which it trips. It is chosen in the same way, a little above the largest current the circuit normally carries, so that normal use never trips it but a fault does. A lighting circuit whose lamps draw 4 A in total might have a 6 A trip switch, while a circuit for a 9.2 kW shower on 230 V, which draws 9200 ÷ 230 = 40 A, needs a setting of 45 A.
Worth remembering
- A circuit breaker (trip switch) is a resettable electromagnetic switch, faster than a fuse.
- Choose a trip switch setting a little above the normal current, as for a fuse rating.
- Fuses and trip switches cut off excessive current to protect the wiring and the appliance.
Worked example
An appliance drawing 2 A normally may use an appropriate 3 A fuse rather than a much larger rating.
Wire a plug, then break it
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
5 A: above normal current and the smallest suitable listed rating.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.