Thermal Properties and Temperature · Cambridge syllabus 2.2 · Lesson 3 of 3
Melting, Boiling and Evaporation
Includes Supplement objectivesA heating curve has sloping sections when temperature rises and plateaus during changes of state; pure water melts at 0 °C and boils at 100 °C at standard atmospheric pressure. Evaporation cools a liquid because escaping particles take energy away, reducing the average energy of those remaining.
By the end, you can
- Interpret temperature–time graphs.
- Identify melting and boiling regions.
- Understand why temperature remains constant during a change of state.
- Know that pure water melts at 0 °C and boils at 100 °C at standard atmospheric pressure.
- Explain evaporation using particle energy.
- Explain cooling caused by evaporation.
- Identify factors affecting evaporation rate. [Supplement]
- Explain the cooling of an object in contact with an evaporating liquid. [Supplement]
- Describe the differences between boiling and evaporation. [Supplement]
Heating curves
A heating curve plots temperature against time as a substance is heated steadily from solid to gas, and its shape is the clearest picture of what a change of state actually is.
It has five parts. The solid warms, and the line rises. At the melting point the line goes flat while the solid melts, even though heating continues; on this flat part solid and liquid are present together. The liquid then warms, and the line rises again. At the boiling point the line goes flat a second time while the liquid boils. Finally the gas warms and the line rises once more.
The flat sections are the point. Energy is being supplied throughout, so where is it going while the temperature does not change? Into separating the particles — pulling them apart against the forces of attraction between them — rather than into making them move faster. During melting it frees the particles from their fixed positions; during boiling it separates them completely. Because the particles are not speeding up, the temperature does not rise. Run the process backwards and a cooling curve has flat parts at exactly the same temperatures, as the gas condenses and the liquid freezes, with the energy now given out to the surroundings.
For pure water at standard atmospheric pressure the two flat parts come at fixed temperatures worth knowing by heart: ice melts at 0 °C and water boils at 100 °C, which are 273 K and 373 K. A bigger block of ice takes longer to melt, but it still melts at 0 °C: the amount of substance changes how long each flat part lasts, not the temperature at which it happens.
Worth remembering
- A heating curve is flat during melting and boiling, and rising otherwise.
- During a change of state, energy separates particles instead of speeding them up, so the temperature is constant.
- Pure water melts at 0 °C and boils at 100 °C at standard atmospheric pressure.
Evaporation
Evaporation is the escape of particles from the surface of a liquid. The particles in a liquid have a spread of energies. At the surface most of them are pulled back by the attraction of their neighbours, but the most energetic ones, the very fastest, have enough energy to break free and escape into the air. Because there are always a few fast particles, evaporation happens at any temperature, not only at the boiling point. Boiling is different in three ways: it happens only at the boiling point, it happens throughout the liquid rather than only at the surface, and bubbles of vapour form inside the liquid.
Evaporation cools the liquid left behind, and the particle explanation is exact. Only the fastest particles escape, so the particles that remain are, on average, slower than before, and slower particles mean a lower temperature. Nothing was taken away from the particles that stayed; the fast ones simply left. Imagine ten particles with speeds of 1, 2, 3 and so on up to 10 units: their average speed is 5.5 units. If the two fastest escape, the average speed of the eight that are left is only 4.5 units.
Three things make evaporation faster. A higher temperature means more particles have enough energy to escape. A larger surface area means more particles are at the surface, where they can escape. And air moving over the surface carries the escaped particles away, so fewer of them fall back into the liquid. That is why washing dries fastest on a warm, windy day, spread out on the line rather than bunched up.
An evaporating liquid also cools anything it is touching. Wrap a thermometer bulb in cotton wool soaked in ethanol: as the ethanol evaporates it cools, and once it is colder than the bulb, energy flows from the bulb into the liquid, so the bulb cools too. A fan speeds up the evaporation and so speeds up the cooling. This is how sweating cools you, why a wet towel feels cold, why ethanol feels cold on the hand, and why a clay water pot kept damp on the outside stays cooler than the air around it.
Worth remembering
- Evaporation: the most energetic particles escape from the surface, at any temperature.
- The particles left behind are slower on average, so the liquid cools.
- Evaporation is faster at a higher temperature, with a larger surface area and with moving air.
- An evaporating liquid takes energy from an object it touches, so the object cools too.
Worked example
A larger surface area or moving air can increase evaporation by helping vapour leave the surface.
Follow a particle
Part of the full Physics course. This unit’s free simulation is Compress a gas.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Evaporation transfers energy away from the cloth and object; airflow removes vapour and can increase evaporation.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.