Electromagnetic Spectrum · Cambridge syllabus 3.3 · Lesson 4 of 4
Analogue and Digital Signals
Includes Supplement objectivesAn analogue signal varies continuously. A digital signal represents information using discrete levels, often two. Small noise can be removed by regenerating a digital signal if the correct level remains distinguishable.
By the end, you can
- Distinguish analogue and digital signals. [Supplement]
- Explain why digital signals are useful for modern communication. [Supplement]
- Know that a sound can be transmitted as a digital or an analogue signal. [Supplement]
Signals
An analogue signal varies continuously and can take any value, like the smooth trace of a sound wave. A digital signal takes only a few fixed values, usually just two, written 0 and 1, so it is a stream of pulses that are either on or off.
A sound can be transmitted either way. A microphone turns sound into a voltage that rises and falls smoothly with the pressure of the sound wave, and sending that voltage just as it is gives an analogue signal. Alternatively, the voltage can be measured at regular, very short intervals and each measurement turned into a code of 0s and 1s, giving a digital signal; the receiver decodes the numbers and rebuilds the sound. Telephone calls, music streaming and digital radio all send sound this way.
Both kinds of signal weaken as they travel and both pick up noise — unwanted random additions from electrical interference. The difference is what can be done about it. Amplify an analogue signal and you amplify the noise with it, so the distortion builds up along a long transmission and cannot be removed. A digital signal only needs the receiver to decide, for each pulse, whether it is nearer to a 0 or a 1. Provided the noise is smaller than the gap between the two levels, that decision is right every time, and a clean signal is regenerated exactly as it was sent.
That accurate regeneration gives the two main benefits of digital signalling. The signal can be cleaned up at each relay station and sent much further without the noise building up, so it has a greater range. And digital systems can transmit data at a much higher rate, carrying more information each second. That is why almost all communication is now digital.
Worth remembering
- Analogue varies continuously; digital takes only a few fixed values, usually 0 and 1.
- A sound can be transmitted as an analogue signal or as a digital one.
- Digital pulses can be regenerated exactly, removing noise; analogue noise cannot be removed.
- Benefits of digital: a higher rate of data transmission and a greater range.
Worked example
A received high level of 0.8 V can be restored to 1 V if the decision threshold is 0.5 V.
Recover a digital signal
Part of the full Physics course. This unit’s free simulation is Make a wave.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Repeaters can regenerate distinct levels and reduce accumulated noise, provided the bits can still be identified.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.