Sound · Cambridge syllabus 3.4 · Lesson 1 of 4
Production and Propagation of Sound
Includes Supplement objectivesVibrating sources create pressure variations that propagate through a medium. Sound in air is longitudinal. In vacuum there are no particles to transmit the mechanical disturbance.
By the end, you can
- Sound is produced by vibrating sources.
- Vibrations transfer through a medium.
- State that humans can hear frequencies from about 20 Hz to 20 000 Hz.
- Compressions and rarefactions. [Supplement]
- Sound requires a medium.
- Know that sound generally travels faster in solids than in liquids, and faster in liquids than in gases. [Supplement]
Sound production
Sound is produced by something vibrating. A loudspeaker cone moves back and forth, a guitar string oscillates, vocal cords flutter, and each pushes on the air around it.
Those vibrations disturb the medium around the source, and the disturbance travels outwards as a sound wave. In air, each layer of air pushes on the next and then moves back; the air itself does not travel from the speaker to your ear, in the way any wave carries energy without carrying matter. Sound travels through solids and liquids as well as gases: you can hear a tap on a table with your ear pressed to the wood, and whales hear each other through the sea.
Human ears respond to only a limited range of frequencies, from about 20 Hz to about 20 000 Hz. A 20 Hz sound is a very low rumble; 20 000 Hz is a very high whine that many adults can no longer hear, because the upper limit falls with age. Sound with a frequency above 20 000 Hz is called ultrasound. Dogs and bats can hear some of it, but we cannot.
Worth remembering
- Sound is produced by a vibrating source.
- The vibrations are passed on through a medium: a solid, a liquid or a gas.
- Humans can hear frequencies from about 20 Hz to 20 000 Hz.
Longitudinal waves
Sound is a longitudinal wave. The particles of the medium vibrate back and forth along the same direction the sound travels, not up and down across it.
Because sound needs particles to pass the vibration along, it cannot travel through a vacuum. The classic demonstration is an electric bell in a sealed jar: as the air is pumped out the sound fades to almost nothing while the hammer is still visibly striking, because light needs no medium. On the Moon, where there is no air, astronauts standing side by side have to talk by radio.
Where the vibrating particles are squeezed together the air forms a compression, a region of slightly higher pressure; where they are spread apart it forms a rarefaction, a region of slightly lower pressure. A sound wave is a travelling pattern of compressions and rarefactions, and neighbouring compressions are one wavelength apart. Your eardrum is pushed in by each compression and moves out at each rarefaction, so it vibrates at the frequency of the source.
How fast the vibration is passed on depends on the medium. Sound generally travels faster in solids than in liquids, and faster in liquids than in gases: about 340 m/s in air, about 1500 m/s in water and about 6000 m/s in steel.
Sound is often drawn as a wavy line, but that graph is plotting pressure against distance — it is not a picture of particles moving up and down.
Worth remembering
- Sound is longitudinal: particles vibrate along the direction of travel.
- Sound needs a medium, so it cannot travel through a vacuum.
- Compressions are regions of higher pressure; rarefactions, regions of lower pressure.
- Sound is fastest in solids and slowest in gases.
Worked example
A vibrating loudspeaker alternately compresses and rarefies nearby air.
Compressions and rarefactions
Part of the full Physics course. This unit’s free simulation is Make a wave.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
There are no material particles to pass on the vibrations.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.