Electromagnetic Effects · Cambridge syllabus 4.5 · Lesson 3 of 6
Electric Motors
Includes Supplement objectivesOpposite forces on the two sides of a current-carrying coil create a turning effect. A split-ring commutator reverses the coil current each half-turn so rotation continues in the same sense. Brushes maintain electrical contact.
By the end, you can
- Explain how the motor effect produces rotation.
- Understand the roles of coil, magnetic field, split-ring commutator and brushes. [Supplement]
- Know that the turning effect on a coil increases with more turns, a larger current and a stronger magnetic field.
- Use the left-hand rule to find the directions of the forces on the sides of a coil, and so the way the coil turns. [Supplement]
Motor operation
A simple direct-current motor is a coil of wire carrying a current in a magnetic field. The two sides of the coil carry current in opposite directions, so the forces on them are in opposite directions: one side is pushed up and the other down. That pair of opposite forces produces a turning effect, and the coil rotates.
A current-carrying coil in a magnetic field may experience a turning effect, and the turning effect is increased by more turns on the coil, a larger current, or a stronger magnetic field. More turns add more pairs of forces, and a larger current or a stronger field makes the force on each side bigger. Reversing the current or the field reverses the direction of rotation.
There is a problem, though. Once the coil has turned half a turn, the side that was on the left is now on the right, so the force that was lifting it is now pushing it down, and the coil would simply rock back and forth.
The split-ring commutator solves it. It is a ring divided into two halves, each connected to one end of the coil, pressed against fixed carbon brushes that carry the current in and out. Every half turn the gap in the ring passes the brushes and the connections swap, reversing the current in the coil. The forces therefore reverse at exactly the moment they would otherwise oppose the motion, and the rotation continues in the same direction.
The left-hand rule from the previous lesson gives the direction of the force on each side, and so the way the coil turns. Point the first finger along the field, from north to south, and the second finger along the current; the thumb points along the force. Look at a coil between a north pole on the left and a south pole on the right. If the current in the left-hand side flows towards you and in the right-hand side away from you, the rule pushes the left side up and the right side down, so the coil turns clockwise. Reverse either the current or the field and both forces reverse, so it turns anticlockwise.
Worth remembering
- Opposite forces on the two sides of the coil produce a turning effect.
- More turns, a larger current or a stronger field increase the turning effect.
- The split-ring commutator reverses the current every half turn, keeping rotation one way.
Worked example
Increasing current or field strength can increase the motor’s turning effect.
Turn a current-carrying coil
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
It reverses current in the coil every half-turn so the turning effect continues in the same rotational direction.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.