Density · Cambridge syllabus 1.4 · Lesson 2 of 3
Density of Irregular Solids
For an irregular object, submerge it fully and measure the increase in water volume. Avoid trapped air and splashes. This increase is the object volume; combine it with the measured mass.
By the end, you can
- Measure the volume of an irregular object by water displacement.
- Calculate density from measured mass and displaced volume.
Displacement method
A stone has no formula for its volume, so measure the space it occupies instead. Part-fill a measuring cylinder with water and record the level. Lower the stone in on a thread until it is completely submerged, and record the new level. The rise is the volume of the stone.
A stone of mass 75 g that raises the water from 30 cm³ to 55 cm³ has a volume of 25 cm³, so its density is 75 ÷ 25 = 3.0 g/cm³.
Three details decide whether the result is any good. Lower the object gently on a thread — dropping it splashes water out of the cylinder, and every drop lost is volume subtracted from your answer. Make sure it is fully submerged, or you have measured only part of it. And watch for air bubbles clinging to the surface, which add their own volume and make the object appear less dense than it is.
If the object floats, this method needs adapting: push it under with a thin rod, or attach a heavy sinker, measure the volume of the sinker alone first, and subtract.
Worth remembering
- Volume of an irregular solid = final water reading − initial water reading.
- Lower it gently, submerge it fully, and dislodge trapped air bubbles.
Worked example
A stone of mass 75 g raises water from 30 to 55 cm³: volume = 25 cm³ and density = 3 g/cm³.
Density and displacement
Change a value and watch the readings follow. Open it on the lab stage
Density and displacement
It sinks in water: the level rises from 100 cm³ to 140 cm³.
- Object density
- 3 g/cm³
- 120 g ÷ 40 cm³
- Liquid density
- 1 g/cm³
- Cylinder reading
- 140 cm³
- 100 cm³ + 40 cm³ displaced
- Rise in level
- 40 cm³
- 140 cm³ − 100 cm³
Goal
Measure an object’s volume by displacement, work out its density, and find what decides whether it floats.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Keep the volume at 40 cm³ and double the mass. What happens to the density?, not yet
- Make a 50 cm³ object that neither floats nor sinks in water., not yet
- Find an object that floats in brine but sinks in oil., not yet
density = mass ÷ volume
120 g ÷ 40 cm³ = 3 g/cm³; water is 1 g/cm³
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
The cylinder holds 100 cm³ of liquid before the object goes in: oil of 0.8 g/cm³, water of 1 g/cm³ or brine of 1.2 g/cm³. An object denser than the liquid sinks; a less dense one floats with only part of it under the surface. The drawing is a flat slice, so the block’s area is drawn to the same scale as the cylinder’s.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
ρ = 90 ÷ 12 = 7.5 g/cm³.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.