Density · Cambridge syllabus 1.4 · Lesson 3 of 3
Density of Liquids
Includes Supplement objectivesSubtract the empty container mass from the filled container mass to obtain the liquid mass. Divide by measured liquid volume. An object floats when its average density is below the liquid density, and liquids that do not mix settle in layers with the densest at the bottom.
By the end, you can
- Determine the mass and volume of a liquid.
- Calculate density.
- Explain floating and sinking using relative density.
- Decide from density data whether one liquid will float on another, when the liquids do not mix. [Supplement]
Experimental measurement
A liquid takes the shape of its container, so its volume is easy — read it straight off a measuring cylinder, at the bottom of the meniscus, with your eye level with the surface. The mass is the harder half, because you cannot put a liquid on a balance without something to hold it.
So measure the container twice. Find the mass of the empty, dry measuring cylinder. Pour in a known volume of the liquid and find the mass again. The difference is the mass of the liquid alone. A cylinder of mass 40 g that reads 120 g when holding 100 cm³ of liquid tells you the liquid has a mass of 80 g, so its density is 80 ÷ 100 = 0.80 g/cm³.
Subtracting the container mass is the step that gets skipped, and it makes the answer far too large. It is also why the cylinder must be dry at the start: water left inside is counted as part of the liquid you are measuring.
Comparing densities predicts floating. An object floats in a liquid if its average density is less than the liquid’s. A sealed object of average density 0.9 g/cm³ floats in water at 1.0 g/cm³ — and "average" is doing real work there, because a steel ship floats on account of the air inside it, even though steel itself sinks.
Worth remembering
- Liquid mass = (cylinder + liquid) − (empty cylinder). Then ρ = m ÷ V.
- An object floats when its average density is less than the fluid’s.
Liquids floating on liquids
The same density rule works for liquids, provided the liquids do not mix. Pour cooking oil into a glass of water and the oil ends up as a layer on top, however you pour it, because oil has a density of about 0.92 g/cm³ and water 1.00 g/cm³. The less dense liquid floats on the denser one. This is why spilled oil spreads across the surface of the sea instead of sinking.
With more than two liquids that do not mix, they settle into layers in order of density, with the densest at the bottom and the least dense at the top. Suppose liquid A has a density of 1.26 g/cm³, liquid B 0.80 g/cm³ and liquid C 1.00 g/cm³. Put them in order: B (0.80) is least dense, then C (1.00), then A (1.26). So in a tall jar, B floats on top, C sits in the middle and A lies on the bottom.
A solid object dropped into the jar follows the same rule. It sinks through any layer less dense than itself and floats on the first layer that is denser. A plastic bead of density 0.95 g/cm³ sinks through B, because 0.95 is greater than 0.80, but floats on C, so it rests at the boundary between B and C.
The condition "do not mix" matters. Liquids that dissolve in each other, such as alcohol and water, do not form layers at all: they blend into a single liquid with a density somewhere in between, so the floating rule cannot be applied to them.
Worth remembering
- Liquids that do not mix form layers: the less dense liquid floats on the denser one.
- Several liquids settle in order of density, densest at the bottom.
- A solid comes to rest on top of the first layer that is denser than itself.
Worked example
Container: 40 g empty, 120 g filled with 100 cm³. Liquid density = (120 − 40) ÷ 100 = 0.80 g/cm³.
Density and displacement
Change a value and watch the readings follow. Open it on the lab stage
Density and displacement
It sinks in water: the level rises from 100 cm³ to 140 cm³.
- Object density
- 3 g/cm³
- 120 g ÷ 40 cm³
- Liquid density
- 1 g/cm³
- Cylinder reading
- 140 cm³
- 100 cm³ + 40 cm³ displaced
- Rise in level
- 40 cm³
- 140 cm³ − 100 cm³
Goal
Measure an object’s volume by displacement, work out its density, and find what decides whether it floats.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Keep the volume at 40 cm³ and double the mass. What happens to the density?, not yet
- Make a 50 cm³ object that neither floats nor sinks in water., not yet
- Find an object that floats in brine but sinks in oil., not yet
density = mass ÷ volume
120 g ÷ 40 cm³ = 3 g/cm³; water is 1 g/cm³
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
The cylinder holds 100 cm³ of liquid before the object goes in: oil of 0.8 g/cm³, water of 1 g/cm³ or brine of 1.2 g/cm³. An object denser than the liquid sinks; a less dense one floats with only part of it under the surface. The drawing is a flat slice, so the block’s area is drawn to the same scale as the cylinder’s.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Yes. Its average density is lower than water density.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.