Density · Cambridge syllabus 1.4 · Lesson 1 of 3
Density of Solids
Density describes mass per unit volume. Measure mass and dimensions separately, calculate volume, then use ρ = m/V. Keep mass and volume units consistent throughout the calculation.
By the end, you can
- Use density = mass / volume.
- Rearrange the equation to calculate mass or volume.
- Measure dimensions.
- Calculate volume.
- Determine density experimentally.
Density equation
Density answers a question that mass alone cannot: how much matter is packed into each unit of volume. It is defined as ρ = m ÷ V, mass divided by volume, and it is what people are reaching for when they say lead is "heavier" than wood. A tonne of lead and a tonne of wood weigh the same; the lead just takes up far less room.
The SI unit is kg/m³, but g/cm³ is often more convenient in the laboratory, and the two differ by a factor of 1000: water is 1.0 g/cm³ or 1000 kg/m³. Mixing the two systems inside one calculation is the commonest way to get an answer out by a factor of a thousand, so decide which you are working in before you start.
Density is a property of the material, not of the lump. Cut a copper block in half and each half has half the mass and half the volume, so the density is unchanged at 8.9 g/cm³. This is why density can be used to identify a material.
- ρ = m ÷ V
- Density is mass divided by volume.ρ in kg/m³ or g/cm³, m in kg or g, V in m³ or cm³
Worth remembering
- ρ = m ÷ V. Rearranged: m = ρV, V = m ÷ ρ.
- Water: 1.0 g/cm³ = 1000 kg/m³. To convert g/cm³ → kg/m³, multiply by 1000.
Regular solids
For a solid with a regular shape, you can find the volume from its dimensions rather than by displacement. Measure each dimension with a ruler, then apply the formula: a cuboid is l × w × h, a cylinder is πr²h, and a sphere is (4/3)πr³.
Find the mass separately on a balance, then divide. A block of mass 120 g measuring 2 cm × 4 cm × 5 cm has a volume of 40 cm³ and a density of 120 ÷ 40 = 3.0 g/cm³.
The accuracy of the result depends much more on the dimensions than on the mass, because the dimensions are multiplied together — a 1% error in each of three measurements gives roughly a 3% error in the volume. Measure each dimension in several places and average, particularly if the block is not perfectly square.
Worth remembering
- Cuboid V = l × w × h; cylinder V = πr²h; sphere V = (4/3)πr³.
- Errors in the dimensions matter three times over, because they multiply.
Worked example
A 120 g block occupies 40 cm³: density = 120 ÷ 40 = 3 g/cm³.
Density and displacement
Change a value and watch the readings follow. Open it on the lab stage
Density and displacement
It sinks in water: the level rises from 100 cm³ to 140 cm³.
- Object density
- 3 g/cm³
- 120 g ÷ 40 cm³
- Liquid density
- 1 g/cm³
- Cylinder reading
- 140 cm³
- 100 cm³ + 40 cm³ displaced
- Rise in level
- 40 cm³
- 140 cm³ − 100 cm³
Goal
Measure an object’s volume by displacement, work out its density, and find what decides whether it floats.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Keep the volume at 40 cm³ and double the mass. What happens to the density?, not yet
- Make a 50 cm³ object that neither floats nor sinks in water., not yet
- Find an object that floats in brine but sinks in oil., not yet
density = mass ÷ volume
120 g ÷ 40 cm³ = 3 g/cm³; water is 1 g/cm³
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
The cylinder holds 100 cm³ of liquid before the object goes in: oil of 0.8 g/cm³, water of 1 g/cm³ or brine of 1.2 g/cm³. An object denser than the liquid sinks; a less dense one floats with only part of it under the surface. The drawing is a flat slice, so the block’s area is drawn to the same scale as the cylinder’s.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
m = ρV = 2.7 × 20 = 54 g.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.