Radioactivity · Cambridge syllabus 5.2 · Lesson 2 of 7
Alpha, Beta and Gamma Radiation
Includes Supplement objectivesAlpha radiation consists of helium nuclei; beta radiation consists of fast electrons from the nucleus; gamma radiation is electromagnetic. Alpha is strongly ionising with low penetration, while gamma is more penetrating and less strongly ionising. Alpha and beta are deflected in opposite directions by electric and magnetic fields; gamma is not deflected.
By the end, you can
- Nature of alpha radiation.
- Strong ionising ability.
- Low penetration compared with beta and gamma.
- Explain, using charge and kinetic energy, why alpha ionises more strongly than beta and gamma, and so penetrates least. [Supplement]
- Nature of beta radiation.
- Intermediate penetration and ionisation.
- Electromagnetic radiation.
- High penetration.
- Lower ionising ability than alpha.
- Describe the deflection of α-particles, β-particles and γ-radiation in electric and magnetic fields. [Supplement]
Alpha
An alpha particle is a helium nucleus: two protons and two neutrons bound together, with a relative charge of +2 and a relative mass of 4. Alpha particles are emitted by some heavy nuclei, such as those of uranium, radium and americium.
Alpha is the most strongly ionising of the three radiations. As it passes through matter it knocks electrons out of a great many of the atoms it meets, so it creates a dense trail of ions.
The reasons are its charge and its kinetic energy. With a charge of +2 it pulls hard on the electrons of every atom it passes, and its large kinetic energy lets it go on ionising thousands of atoms before it stops. A beta particle has a smaller charge, −1, so it ionises fewer atoms in each centimetre; gamma radiation has no charge, so it ionises fewest of all.
That same property makes it the least penetrating. Each ionisation costs it some energy, so it runs out of energy very quickly: a few centimetres of air or a single sheet of paper is enough to stop it.
Worth remembering
- Alpha = helium nucleus: 2 protons and 2 neutrons, charge +2, mass 4.
- Most strongly ionising of the three, because of its +2 charge and large kinetic energy.
- Least penetrating: stopped by paper or a few centimetres of air.
Beta
A beta particle is a fast-moving electron, with a relative charge of −1 and a very small mass. It is emitted from the nucleus during a decay, not taken from the electrons orbiting the atom, which is why it counts as nuclear radiation.
Beta is in the middle of the three for both ionisation and penetration. It ionises less strongly than alpha, so it loses its energy more slowly and travels further: it can pass through paper and through a few metres of air, but it is stopped by a few millimetres of aluminium.
Because it is both moderately ionising and moderately penetrating, beta is the radiation whose count rate changes most usefully when a thin sheet of material is placed in its path, which is the basis of the thickness gauges met later in the topic.
Worth remembering
- Beta = fast electron emitted from the nucleus, charge −1, very small mass.
- Moderately ionising and moderately penetrating.
- Passes through paper; stopped by a few millimetres of aluminium.
Gamma
A gamma ray is not a particle of matter but electromagnetic radiation: a wave of very high frequency, at the far end of the electromagnetic spectrum beyond X-rays. It has no charge and no mass, and it is often emitted from a nucleus straight after an alpha or beta decay.
Gamma is by far the most penetrating of the three. It passes easily through paper and aluminium, and several centimetres of lead or a thick wall of concrete is needed to reduce it substantially. Even then it is never stopped completely, only made weaker.
It is also the least ionising. Having no charge, it ionises an atom only on the rare occasions it interacts with one directly, so it can travel a long way through air or the body before it gives up its energy.
Worth remembering
- Gamma = high-frequency electromagnetic radiation, no charge, no mass.
- Most penetrating: reduced by thick lead or concrete, never fully stopped.
- Least ionising of the three.
Deflection in fields
Alpha and beta particles are charged, so electric and magnetic fields push on them and bend their paths. Gamma radiation has no charge, so it passes straight through both kinds of field without being deflected, which is one way to tell it apart from the other two.
Between two parallel metal plates, one positive and one negative, alpha particles curve towards the negative plate, because they are positive, and beta particles curve towards the positive plate, because they are negative. The two radiations are deflected in opposite directions.
In a magnetic field the force on a moving charged particle acts at right angles both to the field and to the direction of motion, so the particle follows a curved path; its direction can be found with Fleming’s left-hand rule. Alpha and beta again curve in opposite directions, because their charges are opposite.
In both kinds of field, beta particles are deflected far more than alpha particles. An alpha particle has twice the charge, but it is about 7000 times as massive as a beta particle, so it is much harder to turn aside.
Worth remembering
- Alpha and beta are deflected by electric and magnetic fields; gamma is not, because it has no charge.
- Alpha and beta bend in opposite directions because their charges are opposite.
- Beta is deflected much more than alpha, because its mass is far smaller.
Worked example
Paper can stop typical alpha particles; thin metal can stop many beta particles; thick lead or concrete reduces gamma intensity.
Compare radiation penetration
Change a value and watch the readings follow. Open it on the lab stage
Compare radiation penetration
90% of the beta radiation gets through 1 mm of paper.
- Radiation getting through
- 90%
- 100% × (10 mm − 1 mm) ÷ 10 mm
Goal
Send alpha, beta and gamma radiation at paper, aluminium and lead, and find what it takes to stop each one.
Predict, where you are
If Ichange theto, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Find the thinnest sheet of aluminium that stops all the beta radiation., not yet
- Cut the gamma radiation getting through to a quarter., not yet
- Find an absorber that stops alpha and beta but lets most of the gamma through., not yet
Absorber
more strongly ionising → gives up its energy over a shorter distance → stopped by a thinner absorber
Radiation getting through / %
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Illustrative figures for a typical school source: beta thins out evenly across its range, and gamma halves over a fixed thickness of each material. Real sources vary, and none of this is shielding or exposure advice.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Gamma radiation.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.