Radioactivity · Cambridge syllabus 5.2 · Lesson 1 of 7
Detecting Radiation
Includes Supplement objectivesA detector connected to a counter records radiation from both the source and background, as a count rate in counts/s or counts/minute. Measure background over a suitable interval and subtract its count rate from the total measured rate. Longer counting intervals reduce relative random variation.
By the end, you can
- Identify natural and human-made sources.
- Understand that background radiation contributes to measured count rate.
- Measure ionising radiation with a detector connected to a counter, giving the count rate in counts/s or counts/minute.
- Correct measurements for background where appropriate. [Supplement]
Background radiation
Background radiation is the low level of ionising radiation that is around us everywhere, all the time. A detector picks it up even when there is no radioactive source anywhere near it.
Most of it is natural. Radon, a radioactive gas that seeps out of the ground into the air, is the largest single contributor in most places. Rocks and building materials, food and drink, which contain traces of naturally radioactive elements such as potassium, and cosmic rays from space make up most of the rest. Human-made sources are a smaller share, mainly medical X-rays and scans, with very small contributions from nuclear power and from the fallout of past weapons tests.
The level varies from place to place: it is higher at high altitude, where there is less air above to absorb cosmic rays, and higher over granite, which contains more uranium. Wherever you are, a detector measures the background as well as any source you are studying, so every count rate taken near a source includes some background radiation.
Worth remembering
- Background radiation is always present, even with no source nearby.
- Main sources: radon gas, rocks and buildings, food and drink, cosmic rays; medical uses lead the human-made ones.
- Every measured count rate includes background radiation.
Detection
Ionising radiation is measured with a detector connected to a counter. The usual detector is a Geiger–Müller tube: each time radiation enters it and ionises the gas inside, it produces a pulse of current, and the counter adds up the pulses.
The result is given as a count rate, the number of counts in each second or in each minute, written in counts/s or counts/minute. A counter that records 1800 counts in 5 minutes gives a count rate of 1800 ÷ 5 = 360 counts/minute, which is the same as 360 ÷ 60 = 6 counts/s.
Because the detector also counts background radiation, the count rate from a source alone is found by measuring the background first, with no source present, and subtracting it. If the background is 20 counts/minute and the reading with the source in place is 380 counts/minute, the corrected count rate is 380 − 20 = 360 counts/minute. Leaving out this step makes every result too high.
Radioactive decay is random, so counts over equal time intervals differ slightly even when nothing has changed. Counting for longer, or repeating and averaging, reduces the effect of that randomness.
- count rate = number of counts ÷ time
- The number of counts recorded in each second or each minute, in counts/s or counts/minute.
- corrected count rate = measured count rate − background count rate
- The count rate due to the source alone, once the background has been taken away.
Worth remembering
- A detector connected to a counter measures ionising radiation.
- Count rate is given in counts/s or counts/minute.
- Corrected count rate = measured count rate − background count rate.
Worked example
Total count rate 85 counts/min and background 15 counts/min give source count rate 70 counts/min.
Measure a half-life
Part of the full Physics course. This unit’s free simulation is Compare radiation penetration.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Measured rate = 120 counts/min; corrected rate = 100 counts/min.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.