Radioactivity · Cambridge syllabus 5.2 · Lesson 3 of 7
Comparing Nuclear Radiation
Includes Supplement objectivesPenetration describes how far radiation passes through material; ionisation describes its ability to remove electrons from atoms. Alpha, with charge +2 and large kinetic energy, ionises strongly and loses energy rapidly, so it has a short range. Gamma has no charge, ionises weakly and is reduced gradually rather than stopped.
By the end, you can
- Compare stopping materials.
- Understand why different shielding is required.
- Compare ability to ionise atoms.
- Relate ionisation to biological damage.
- Explain the relative ionising effects of the three radiations using their kinetic energy and their electric charge. [Supplement]
Penetration
Penetration is tested with absorbers. Take a count with the source in place, then insert successive materials and see when the count rate falls to background.
Paper stops alpha. A few millimetres of aluminium stops beta. Gamma passes through both and is only substantially reduced by several centimetres of lead or a few metres of concrete. In air, alpha travels a few centimetres, beta up to a few metres, and gamma many metres while getting steadily weaker.
That ordering is the basis of a standard identification question. If the count rate drops to background when paper is inserted, the source is emitting alpha. If paper makes little difference but aluminium brings it to background, it is beta. If even thick lead only reduces it, gamma is present. A source emitting more than one type shows more than one step.
It is also why different shielding is needed for each radiation. A sheet of paper or the case of an instrument is enough for an alpha source; a beta source needs a few millimetres of aluminium or perspex around it; a gamma source must be kept behind thick lead or concrete.
Worth remembering
- Alpha: stopped by paper. Beta: stopped by a few mm of aluminium. Gamma: reduced by thick lead or concrete.
- Ranges in air: alpha a few cm, beta up to a few m, gamma many m and never fully stopped.
- Each radiation needs its own shielding: paper, aluminium, or thick lead and concrete.
Ionisation
Ionising power runs in exactly the opposite order to penetration. Alpha is the most strongly ionising, beta is moderate and gamma is the weakest. Each time radiation ionises an atom it gives up some of its energy, so a strong ioniser uses up its energy quickly and soon stops, while a weak ioniser can pass through a great deal of material.
Ionisation is also what makes radiation harmful to living things, because ionising the molecules in a cell can damage or kill it. Outside the body, gamma is the greater hazard, because it can reach the internal organs while alpha cannot get through the outer layer of skin. Inside the body, if a source is swallowed or breathed in, alpha is by far the most dangerous, because all of its intense ionisation happens in a small volume of living tissue.
The difference in ionising power comes from the electric charge and the kinetic energy of each radiation. An alpha particle has a charge of +2, so it pulls strongly on the electrons of every atom it passes and ionises almost every one, and it usually has more kinetic energy than a beta particle, which lets it keep doing so thousands of times before it stops. A beta particle has a charge of only −1 and moves much faster, so it exerts a weaker pull for a shorter time on each atom and ionises far fewer atoms in each centimetre. Gamma radiation has no charge at all, so it exerts no electric force on electrons and ionises only when it happens to interact directly with an atom.
Worth remembering
- Ionising power: alpha > beta > gamma. Penetration is the reverse.
- A strong ioniser gives up its energy quickly, so its range is short.
- Alpha has a large charge (+2) and large kinetic energy; beta has a smaller charge (−1); gamma has none.
- Outside the body gamma is the greater hazard; inside it, alpha is.
Worked example
A thin sheet can stop alpha, while gamma intensity is reduced progressively by thicker shielding.
Compare radiation penetration
Change a value and watch the readings follow. Open it on the lab stage
Compare radiation penetration
90% of the beta radiation gets through 1 mm of paper.
- Radiation getting through
- 90%
- 100% × (10 mm − 1 mm) ÷ 10 mm
Goal
Send alpha, beta and gamma radiation at paper, aluminium and lead, and find what it takes to stop each one.
Predict, where you are
If Ichange theto, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Find the thinnest sheet of aluminium that stops all the beta radiation., not yet
- Cut the gamma radiation getting through to a quarter., not yet
- Find an absorber that stops alpha and beta but lets most of the gamma through., not yet
Absorber
more strongly ionising → gives up its energy over a shorter distance → stopped by a thinner absorber
Radiation getting through / %
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Illustrative figures for a typical school source: beta thins out evenly across its range, and gamma halves over a fixed thickness of each material. Real sources vary, and none of this is shielding or exposure advice.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
It deposits energy over a short distance and strongly ionises nearby tissue.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.